Waterproofing Services
Commercial waterproofing that keeps water out of your structure, below grade and above grade. Membranes and coatings, joint sealants, crack injection and drainage detailing across Northern Virginia, DC and Maryland.
What Is Commercial Waterproofing?
Waterproofing is keeping water out of a commercial structure, below grade and above grade. It is for building owners and property managers dealing with water intrusion, and for general contractors on new construction who need the envelope sealed.
Water finds every weakness in a building. It comes through failed membranes, open joints, cracks in foundation and deck concrete, and drainage that lets water pond against the structure. We diagnose the source first, then specify the right combination of membrane, sealant, crack injection, and drainage so the fix holds. We work on commercial sites across Fairfax County, Arlington, Loudoun County, Prince William County, Washington, DC, Montgomery County, MD, and Prince George's County, MD. Our scope covers:
- Waterproofing membranes and coatings
- Joint sealants
- Crack injection with polyurethane or epoxy resin
- Drainage detailing
- Foundations, basements and below grade walls
- Plaza decks, planters and parking structures
A membrane only performs on a sound substrate, so the first thing we look at is the concrete. Cracks and spalls should be addressed with concrete repair before waterproofing goes on. On new construction, closed cell spray foam insulation pairs with waterproofing for moisture and air control in the envelope. OTM Construction Services handles the full scope: diagnosis, prep, sealing, membrane or coating, and drainage, so the structure stays dry.
When Do You Need Waterproofing?
If water is getting into your structure, or you are building new and need the envelope sealed before other trades close it in, waterproofing is the right scope. Here are the most common places where building owners, property managers, and general contractors across Northern Virginia, DC, and Maryland call us:
Foundations and Basements
Below grade waterproofing for foundation walls and basement slabs that hold back groundwater and hydrostatic pressure. We seal the concrete with membranes and coatings and inject active cracks so water stays out of the occupied space. Common on commercial buildings in Fairfax County and Arlington.
Plaza Decks
Above grade plaza decks take standing water, foot traffic, and soil contact from what sits on top of them. We install durable membranes and traffic coatings, detail the joints and drains, and add drainage layers that carry water off the deck. We handle plaza deck work from office properties in Washington, DC to campuses in Loudoun County.
Parking Structures
Parking decks see traffic, salt, and constant water exposure. We apply traffic-grade waterproofing coatings, seal expansion and control joints, and inject cracks to protect the concrete and the structure below. Ideal for structured parking on commercial sites across Prince William County and the DMV.
Planters
Planters hold soil and water directly against the structure, so a failed liner leaks into the space below. We waterproof planter walls and floors with membranes detailed for constant moisture and root contact, and add drainage so water moves out instead of pooling. Common on plaza and podium projects throughout Montgomery County and the region.
Joints and Cracks
Moving joints and cracked concrete are the two most common paths for water. We seal joints with the correct sealant and inject active cracks in foundations and decks with polyurethane or epoxy resin. Where the concrete is spalling or unsound, it should get concrete repair first, then waterproofing. Serving commercial sites in Prince George's County and Northern Virginia.
New Construction Envelope
On new construction we seal the foundation, decks, and below grade walls before other trades close things in. Waterproofing pairs with closed cell spray foam insulation for moisture and air control, so the envelope is sealed as one system. We support new commercial projects across the DC metro area.
How It Works
Four steps from diagnosis to a continuous, watertight envelope.
Diagnose and Prep
We find the source of the water intrusion and inspect the concrete. Cracks, spalls and unsound areas are repaired first, then the surface is cleaned and profiled so the waterproofing system can bond.
Seal Joints and Inject Cracks
We seal moving joints with the correct sealant and inject active cracks in foundations and decks with polyurethane or epoxy resin to stop water at the source before the membrane goes on.
Apply Membrane or Coating
We install the specified membrane or coating on foundations, basements, plaza decks, planters or parking structures, detailing terminations, penetrations and transitions so the barrier is continuous.
Drainage and Inspection
We install or detail drainage so water is carried off the structure instead of ponding against it, then inspect the completed system for a continuous, watertight envelope.
Our Waterproofing Systems
The right system for the surface, below grade or above grade.
Membranes and Coatings
Sheet and fluid-applied membranes for foundations, basements and decks, plus traffic-grade coatings for plaza decks and parking structures. We match the system to the surface, the exposure and the loads it will carry.
Joint Sealants and Crack Injection
Sealants for expansion, control and construction joints that keep water out while the structure moves. Polyurethane and epoxy crack injection to seal active leaks in foundations and decks full depth.
Drainage Detailing
Drainage boards, prefabricated drainage layers and detailed drains that carry water off the structure instead of letting it pond. Correct drainage is what keeps the membrane working over the long term.
Waterproofing vs. Damproofing vs. Sealers
These three get used interchangeably, but they are not the same thing and they do not solve the same problem. Here is how full waterproofing compares to damproofing and surface sealers:
| Waterproofing | Damproofing | Sealer / Water Repellent | |
|---|---|---|---|
| Stops liquid water | Yes, continuous barrier | Slows moisture, not standing water | Beads surface water only |
| Holds back hydrostatic pressure | Yes, below grade rated | No | No |
| Bridges cracks | Yes, with the right membrane | No | No |
| Below grade use | Foundations, basements, slabs | Limited, low water table only | Not suitable |
| Above grade / decks | Plaza decks, planters, parking | Not suitable for traffic decks | Light protection on vertical walls |
| Service life | Long, when detailed correctly | Short to moderate | Short, needs frequent reapplication |
| Best for | Active intrusion, decks, foundations, planters, parking structures | Minor dampness where no water pressure exists | Reducing surface absorption on exposed walls |
For commercial projects in Fairfax County, Arlington, DC, and throughout the DMV, full waterproofing is the answer wherever water pressure, standing water, or active intrusion is involved. Damproofing and sealers have a place for minor dampness, but they will not keep water out of a foundation, deck, or planter.
Waterproofing Cost
Waterproofing is quoted after we review the scope, because the system, the surface area, the prep required, and the access all drive the number. Here is how the work is typically priced for commercial projects in Northern Virginia, DC, and Maryland:
Crack Injection
Priced per linear foot
- Active leaks in foundations and walls
- Polyurethane or epoxy resin
- Sealed full depth of the crack
- Structural cracks get concrete repair first
Membranes and Coatings
Priced per square foot
- Foundations, basements and below grade walls
- Plaza decks and planter waterproofing
- Traffic coatings for parking structures
- Surface prep and detailing included
Joint Sealants
Priced per linear foot
- Expansion, control and construction joints
- Sealant matched to movement and exposure
- Backer rod and tooling included
- Deck, wall and foundation joints
Pricing varies based on the system specified, square or linear footage, surface prep, and site access. If the concrete needs work, budget for concrete repair before the membrane goes on. On new construction, bundling waterproofing with spray foam insulation seals the envelope on one mobilization. Call (703) 880-8400 for a project-specific quote covering Loudoun County, Prince William County, Montgomery County, MD, and surrounding areas.
One crew that finds the leak and keeps the structure dry.
You are not chasing a leak with three different subs. One crew diagnoses the source, preps the concrete, seals it, and details the drainage, and one company stands behind the work.
We find the source
We diagnose where the water is actually coming in before we specify a system. Fixing the source instead of chasing symptoms is what keeps the structure dry.
Right system for the surface
Below grade, plaza deck, planter, or parking structure, each surface gets the membrane, coating, and detailing that matches its exposure and loads.
Sound substrate first
A membrane only holds on solid concrete. We repair cracks and spalls and profile the surface before waterproofing goes on.
Full scope, one crew
Prep, joint sealants, crack injection, membrane or coating, and drainage detailing from a single crew on one mobilization.
Waterproofing FAQ
Our waterproofing scope covers waterproofing membranes and coatings, joint sealants, crack injection, and drainage detailing. We work below grade and above grade on foundations, basements, plaza decks, planters, and parking structures to keep water out of the structure.
Below grade waterproofing protects foundations, basement walls, and slabs that sit against soil and hold back groundwater and hydrostatic pressure. Above grade waterproofing protects exposed horizontal and vertical surfaces such as plaza decks, planters, and parking structures from rain, standing water, and runoff. We detail both with the right membranes, coatings, and drainage.
Yes. For active leaks through cracks in concrete foundations and basement walls, we use crack injection with polyurethane or epoxy resin to seal the crack full depth. If the crack is structural or the concrete is spalling, it should be addressed with concrete repair before the waterproofing membrane goes on so the substrate is sound.
Yes. Plaza decks, planters, and parking structures are common above grade waterproofing projects. These surfaces take standing water, traffic, and soil contact, so they need a durable membrane or traffic coating, properly detailed joints and drains, and drainage layers that move water off the structure instead of letting it pond.
We typically schedule waterproofing within 2 to 3 business days of your request. For active water intrusion in Fairfax County, Loudoun County, or Prince William County, same-week availability may be possible depending on crew schedules and site access. Call (703) 880-8400 for the fastest turnaround.
Waterproofing pricing depends on the system specified, the square footage or linear footage, surface prep required, and access conditions. Crack injection is typically priced by the linear foot, coatings and membranes by the square foot, and joint sealants by the linear foot. Every project is different, so we quote after reviewing the scope. Call for a project-specific quote.
Often, yes. A waterproofing membrane or coating only performs on a sound substrate. Cracks, spalls, honeycombing, and exposed rebar should be addressed with concrete repair first. Once the surface is sound and profiled, the waterproofing system bonds and holds. We coordinate both so the sequence is right.
Waterproofing keeps liquid water out of the structure. For vapor drive, condensation, and air leakage in the envelope, closed cell spray foam insulation pairs well because it acts as an air barrier and slows moisture movement. On new construction we coordinate the waterproofing and the insulation so the envelope is sealed as one system.
Both. General contractors bring us in on new construction to seal the envelope, foundation, and decks before other trades close things in. Building owners and property managers call us on existing structures dealing with active water intrusion. We handle new work and remediation across Montgomery County, Prince George's County, and the greater DC area.
The most common sources are failed or aged membranes, open or failed joint sealants, cracks in foundation and deck concrete, and poor drainage that lets water pond against the structure. We diagnose the source first, then specify membranes, sealants, crack injection, and drainage detailing to keep water out for the long term across Northern Virginia, DC, and Maryland.
Request a Waterproofing Quote
Tell us about the water intrusion or the surface you need sealed and we will get back to you within 2 hours during business hours. Or call us directly:
(703) 880-8400Ready to Schedule Waterproofing?
Call now or request a quote. We respond within 2 hours during business hours.