Call (703) 880-8400

Drain Clearing Services

Commercial drain clearing to restore flow in clogged drains and sewer lines. Cabling, root and grease cutting, and hydro assist for stubborn blockages, for facilities, restaurants, retail and property managers across Northern Virginia, DC and Maryland.

Cabling and snaking Root and grease cutting Hydro assist for stubborn clogs No-dig service Same-week response
Call (703) 880-8400
Plan the whole job Sewer Inspectionsthen Drain Clearingthen Hydrojetting

What Is Drain Clearing?

Drain clearing reopens clogged commercial drains and sewer lines to restore flow. It combines cabling and snaking of lines, root and grease cutting, and hydro assist for stubborn blockages, with no digging.

It is built for facilities, restaurants, retail, and property managers dealing with slow or backed-up drains across Fairfax County, Arlington, Loudoun County, and the greater DC metro area. Facilities teams and property managers call us for:

  • Floor drains and area drains
  • Kitchen and grease lines
  • Restroom branch lines
  • Building sewer and main line backups
  • Root intrusion at pipe joints
  • Recurring clogs that need a root-cause plan

When a floor drain, kitchen line, restroom branch or building sewer slows down or backs up, we run a motorized drain machine to cable the line, cutting through roots and grease and pulling the blockage back until the pipe flows freely. For blockages that cabling alone will not fully open, we bring in hydro assist to flush the line and restore full flow. We respond on commercial sites throughout Prince William County, Washington, DC, Montgomery County, MD, and Prince George's County, MD.

Reopening the drain is often step one. If the same line keeps backing up, the next move is to find out why: a sewer inspection cameras the line to pinpoint the root cause of a recurring clog, and when a pipe is coated in grease or scale along its full length, hydrojetting is the heavier full-line clean for when cabling is not enough. OTM Construction Services handles the full scope, from the first cable to advising on what to schedule next, so your building keeps running.

When Do You Need Drain Clearing?

If a drain is slow, gurgling, or backing up, it is time to clear the line before it turns into a full backup. Here are the most common situations where facilities teams and property managers across Northern Virginia, DC, and Maryland call us:

Kitchen and Grease Lines

Restaurant and cafeteria kitchen lines coat with grease over time and slow to a crawl. We cable the line and cut the buildup back to restore flow, then flag when a full-line clean is worth scheduling. Common on food-service sites in Fairfax County and Arlington.

Floor and Area Drains

Backed-up floor drains in kitchens, restrooms, mechanical rooms, and loading areas stop work fast. We clear the branch line and confirm it flows freely so the space is back in service. We respond on commercial sites from office build-outs in Washington, DC to facilities in Loudoun County.

Restroom Branch Lines

Slow or backing-up restroom drains and toilets point to a clogged branch line. We cable the line to pull the blockage and restore flow, keeping restrooms open for tenants and staff on commercial sites across Prince William County and the DMV.

Root Intrusion

Tree roots work into sewer laterals at pipe joints and choke off flow. We run cutting heads sized to the line to shear roots and reopen the pipe, then recommend a sewer inspection to see how bad the intrusion is throughout Montgomery County and the region.

Building Sewer Backups

When the main building sewer backs up, multiple fixtures back up at once. We cable the main line through the cleanout to clear the blockage and get the building draining again on commercial and industrial sites in Prince George's County and Northern Virginia.

Recurring Clogs

A drain that keeps clogging is telling you something. We reopen the line, then help you get ahead of it by scoping the pipe with a sewer inspection or scheduling hydrojetting for a full-line clean across the DC metro area.

How It Works

Four steps from a backed-up drain to a line that flows freely.

1

Assess and Access

We locate the affected drain and find the nearest cleanout or access point, then confirm what is backing up and where. This tells us which line to cable and what cutting head the blockage calls for.

2

Cable and Cut

We run a motorized drain machine through the line, advancing a cutting head that breaks up the blockage, shears roots and scrapes grease off the pipe walls until the cable passes freely.

3

Hydro Assist for Stubborn Blockages

If cabling alone does not fully open the line, we bring in hydro assist to flush the pipe with water pressure, clearing soft debris and restoring full flow through the line.

4

Confirm Flow and Advise

We run water to confirm the drain flows freely, clean up the work area, and flag whether a sewer inspection or hydrojetting is worth scheduling if the clog is likely to recur.

Our Drain Clearing Equipment

Professional-grade machines and tooling for branch lines through main lines.

Motorized Drain Machines

Cable machines matched to the job, from compact units for small branch lines to sectional and drum machines for larger main lines. The right machine per line size means we clear the blockage without damaging the pipe.

Root and Grease Cutting Heads

A full set of cutter heads and augers sized to the line, from retrieval and spade heads for soft clogs to root-cutting blades that shear intrusions at pipe joints and scrape grease off the walls.

Hydro Assist

Water-pressure assist for stubborn blockages that cabling alone will not fully open, flushing soft debris and restoring full flow. When a line needs a heavier full-length scour, we step up to hydrojetting.

Cabling vs. Hydrojetting

Drain clearing by cabling and full-line hydrojetting solve different problems. Cabling is the fast way to break through a clog and reopen a line; hydrojetting is the heavier full-line clean for when cabling is not enough. Here is how they compare:

Cabling (Drain Clearing) Hydrojetting
What it does Breaks through and pulls back the blockage to reopen the line Scours the full length of pipe wall back to a clear diameter
Best for A specific clog, root intrusion at a joint, fast restore of flow Grease and scale coating the whole line, recurring buildup
Root cutting Shears roots at the point of intrusion Cuts and flushes roots, then washes debris out
Grease removal Scrapes grease from the path of the cutter Strips grease off the full pipe circumference
Speed to reopen Fast, often reopens the line on the first visit Longer, a deeper clean rather than a quick reopen
Typical use First response to a slow or backed-up drain Follow-up when cabling alone does not hold

For commercial buildings in Fairfax County, Arlington, DC, and throughout the DMV, cabling is the right first move on a backed-up drain. If the same line keeps clogging or a sewer inspection shows heavy full-length buildup, hydrojetting is the next step for a clean that holds.

Drain Clearing Cost

Drain clearing pricing depends on the line size, the type of blockage, how the line is accessed, and whether hydro assist is needed. Here is a general guide for commercial buildings in Northern Virginia, DC, and Maryland:

Branch Line Clearing

Single line, fast restore of flow

  • Floor drains and area drains
  • Sinks and restroom fixtures
  • Cabling through an existing cleanout
  • Fast restore of flow on a single line

Heavy or Recurring

Full clean and root-cause plan

  • Hydro assist for stubborn blockages
  • Multiple lines on one visit
  • Recurring clogs needing a full clean
  • Pairs with a sewer inspection to find the cause

Pricing varies based on line size, blockage type, access, and whether hydro assist or a full-line clean is required. Multiple lines on the same mobilization are discounted. If a drain keeps backing up, bundle clearing with a sewer inspection to find the cause, or step up to hydrojetting for a full-line clean and save on mobilization. Call (703) 880-8400 for a project-specific quote covering Loudoun County, Prince William County, Montgomery County, MD, and surrounding areas.

One crew that reopens the line and plans what is next.

You are not chasing a rooter, a jetting sub, and a camera crew. One call reopens the drain, and one company tells you what to schedule next so the fix holds.

Fast response

A backed-up drain can shut down a kitchen or restroom. We prioritize drain calls and get a crew on site quickly to reopen the line.

Root and grease cutting

Cutter heads sized to the line shear root intrusions at joints and scrape grease off the pipe walls, not just poke a hole through the clog.

Clean operation

We work through cleanouts and drain access points, contain the mess, and leave the area clean so adjacent trades keep working.

The whole path covered

One call covers cabling, hydro assist, and a plan for what is next, from a sewer inspection to hydrojetting so the fix holds.

Same week
Priority drain response
2 hr
Quote turnaround
No-dig
Works through cleanouts
Class A
VA licensed & insured

Drain Clearing FAQ

We clear clogged commercial drains and sewer lines to restore flow, including floor drains, sinks, kitchen and grease lines, restroom branch lines, roof drains and building sewer laterals. Our equipment handles small branch lines up through larger main lines on commercial buildings across Fairfax County, Arlington, and the DMV.

We cable the line with a motorized drain machine, running a cutting head through the pipe to break up and pull back the blockage. Depending on what is clogging the line, we cut roots or grease, and for stubborn blockages we bring in hydro assist to flush the line and restore full flow.

Recurring clogs are usually a sign of an underlying issue such as root intrusion, grease buildup, a pipe belly, or a partial collapse rather than a one-time blockage. Cabling restores flow, but if the same drain backs up repeatedly we recommend a sewer inspection to camera the line and find the root cause before it turns into a bigger backup.

Cabling is the right tool for breaking through a clog and reopening a line quickly. When a line is coated in grease or heavy scale along its full length, cabling alone may not be enough. In those cases hydrojetting is the heavier full-line clean, using high-pressure water to scour the pipe walls back to a clear diameter.

We know a backed-up drain can shut down a kitchen or restroom, so we prioritize drain calls and offer same-week and, where crews allow, next-day response across Loudoun County, Prince William County, and the rest of Northern Virginia, DC and Maryland. Call (703) 880-8400 for the fastest turnaround.

Yes. We run cutting heads sized to the line to shear tree roots that have intruded at joints and to scrape grease and soft buildup off the pipe walls. For lines with heavy, full-length grease or scale, we pair cabling with hydro assist or recommend hydrojetting for a more complete clean.

We work with facilities teams, restaurants, retail locations and property managers dealing with slow or backed-up drains. Whether it is a single problem drain or recurring backups across a portfolio of buildings, we clear the line and help you plan the next step throughout Montgomery County, Prince George's County, and the greater DC area.

In most cases yes. Cabling and hydro assist work through existing cleanouts and drain access points, so we can restore flow without excavation. If a sewer inspection later shows a collapsed or offset pipe, we can scope a dig or repair as a separate step, but clearing the line itself is a no-dig service.

Request a Drain Clearing Quote

Tell us about the drain and we will get back to you within 2 hours during business hours. Or call us directly:

(703) 880-8400
VA Class A Licensed
$2M General Liability
Same-Week Availability

Ready to Clear That Drain?

Call now or request a quote. We respond within 2 hours during business hours.

Call (703) 880-8400