Sewer Inspections
See exactly what is happening inside the line before you dig. Our CCTV pipe cameras inspect sanitary sewer, storm drain, and industrial piping so you can make informed decisions on repairs, replacements, or new tie-ins.
What Is a CCTV Pipe Camera Inspection?
A CCTV pipe camera inspection uses a waterproof, high-resolution camera to travel through the interior of a pipe and transmit live video back to the operator.
The camera is inserted through an existing access point, such as a cleanout, manhole, or open pipe end, and advanced through the line while recording the condition of the pipe walls, joints, and any obstructions. This non-destructive method works on sanitary sewer lines, storm drains, process piping, and industrial discharge lines from 2 inches to 48 inches in diameter. It is the standard diagnostic tool for spotting:
- Blockages and scale buildup
- Cracks and pipe deterioration
- Root intrusion at joints and cracks
- Offset joints and bellies
- New line verification before final acceptance
- Condition data for point repairs, replacements, or lining
For new construction, they verify that newly installed lines are clear, properly graded, and free of debris or construction damage before final acceptance. For existing infrastructure, they provide the condition data you need to plan point repairs, full replacements, or lining projects without unnecessary excavation. We run pipe inspections on commercial projects across Fairfax County, Loudoun County, Arlington, Prince William County, Washington DC, Montgomery County, MD, and Prince George's County, MD.
OTM provides pipe camera inspections as a standalone service or paired with hydrojetting for a complete inspect-and-clean workflow. When you book both together, we mobilize once, inspect, jet, and re-inspect in the same visit. Your project stays on schedule and you get documented before-and-after condition records for the entire run.
How It Works
Four steps from access to actionable data.
Access Point Setup
We identify the best access point for camera insertion, whether it is a cleanout, manhole, or open pipe end. We confirm pipe diameter, material, and expected run length, then select the right camera system for the job. Setup typically takes 15 to 20 minutes.
Camera Insertion & Navigation
The camera is fed into the pipe and advanced through the line at a controlled pace. Push cameras handle smaller laterals, while robotic crawlers navigate larger mains. The operator monitors speed and position to ensure full coverage of the entire run without missing any section.
Live Video Assessment
As the camera moves through the pipe, the operator reviews live footage on a topside monitor. Defects, blockages, root intrusion, joint offsets, and other findings are logged with distance measurements and screenshots. A built-in sonde transmitter allows us to mark the surface location of any issue for your excavation crew.
Report & Recommendations
After the inspection, we compile a video report with timestamped footage, annotated screenshots, distance markers, and a written summary of all findings. Reports include our recommendations for repair, cleaning, or further investigation. Digital copies are delivered the same day.
When Do You Need Sewer Inspections?
Pipe camera inspections give you condition data before you commit to a repair plan, a new connection, or a property purchase. Here are the most common situations where general contractors and property managers in Northern Virginia, DC, and Maryland call us:
Pre-Purchase / Pre-Construction
Inspect existing sewer and storm lines before buying a property or breaking ground on new work. Camera inspections reveal hidden problems like bellies, cracks, and root intrusion that are invisible from the surface. Common on commercial acquisitions in Fairfax County and Loudoun County.
Blockage Diagnosis
Locate the exact position and cause of a blockage before committing to excavation. Our cameras show whether the obstruction is grease buildup, debris, a collapsed section, or a foreign object. This prevents unnecessary digging on projects across Arlington and Washington DC.
Root Intrusion Assessment
Tree roots penetrate pipe joints and cracks, causing recurring backups. Camera inspections document the severity and location of root intrusion so you can choose between spot repair, hydrojetting, or full replacement. We pair inspections with hydrojetting for a single-visit solution.
Joint Separation and Cracking
Offset joints and cracked pipe walls are common in aging infrastructure. Our cameras measure the extent of joint separation and identify whether the damage is localized or systemic. This data drives repair-versus-replace decisions for municipalities and GCs in Prince William County and Montgomery County.
New Construction Verification
Verify that newly installed sewer and storm lines are clear, properly graded, and free of construction debris before final acceptance. Camera inspections catch problems before backfill, saving expensive rework later. Required on many commercial and municipal projects in the DMV.
Compliance and Permit Inspections
Many jurisdictions in Prince George's County, Fairfax County, and Washington DC require CCTV inspection documentation for permit closeout, easement work, and stormwater compliance. We deliver reports formatted for submittal to inspectors and regulatory agencies.
Push Camera vs. Crawler Camera
We carry both push camera and robotic crawler systems to match the right tool to each pipe. Here is how the two compare:
| Push Camera | Crawler Camera | |
|---|---|---|
| Pipe diameter range | 2 to 12 inches | 6 to 48 inches |
| Distance range | Up to 200 feet | 500+ feet per setup |
| Maneuverability | Flexible rod navigates tight bends and small laterals | Motorized tracks traverse long runs, standing water, and rough interiors |
| Image quality | High-resolution color with LED lighting and auto-focus | Pan-and-tilt head with 360-degree viewing, high-intensity lighting |
| Best for | Lateral lines, building drains, residential and small commercial pipes | Mainline sewers, storm drains, industrial piping, long-distance runs |
Not sure which camera type your project needs? Call (703) 880-8400 and tell us the pipe diameter, material, and run length. We will recommend the right system and provide a quote the same day.
Pipe Inspection Cost
Pipe camera inspection pricing depends on pipe size, run length, number of lines, and site access conditions. Here is a general guide for projects in Northern Virginia, DC, and Maryland:
Residential / Small Commercial
Single lateral or building drain
- Single lateral or building drain inspection
- Push camera, up to 200 feet
- Same-day video report with screenshots
- Sonde locating of defects included
Commercial Mainline
Mainline sewer or storm drain
- Mainline sewer or storm drain inspection
- Robotic crawler for pipes 6 to 48 inches
- Detailed video report with distance markers
- Most common for GC and municipal projects
Multi-Line / Full Site
Multiple lines, one mobilization
- Multiple lines inspected in a single mobilization
- Push camera and crawler as needed
- Comprehensive site report with all findings
- Multi-day projects quoted individually
Pricing varies by pipe condition, access difficulty, and total footage. Bundle pipe inspections with hydrojetting and save on mobilization costs. Call (703) 880-8400 for a project-specific quote.
Our Inspection Equipment
Commercial-grade camera systems for every pipe size and condition.
Push Cameras
Self-leveling color cameras on flexible push rods, rated for pipes from 2 to 12 inches in diameter. Push cameras are ideal for lateral lines, building drains, and shorter runs up to 200 feet. High-intensity LED lighting and auto-focus provide clear images even in standing water or heavy sediment conditions.
Crawler / Robotic Cameras
Tracked robotic crawlers with motorized pan-and-tilt camera heads for mainline inspections in pipes from 6 to 48 inches. Crawlers navigate long distances, traverse standing water, and handle rough pipe interiors that push cameras cannot reach. Variable speed control ensures thorough coverage on every run.
Location Transmitters
Built-in sonde transmitters in every camera head broadcast a locatable signal that we track from the surface. Using a topside locator, we pinpoint the horizontal position and depth of any defect, blockage, or tie-in point. This gives your excavation crew a precise dig location without guesswork.
Recording Equipment
All inspections are recorded in high-definition with on-screen distance counters, date/time stamps, and job identification overlays. Footage is captured to solid-state drives for reliability. We export video files, screenshots, and reports digitally for easy sharing with your project team and owner representatives.
One crew that inspects, documents, and clears the line.
You are not chasing a camera sub, waiting days for a report, then booking a separate cleaning contractor. One call, one mobilization, and one company standing behind the findings.
Same-day video reports
Annotated footage, screenshots, distance markers, and written findings delivered digitally the same day, formatted for submittals.
Commercial-grade crawlers
Robotic pan-and-tilt crawlers inspect mainlines up to 48 inches, not residential push cameras, with detail on every joint and defect.
Certified operators
Trained commercial pipe-inspection operators who know what to look for and how to document it. VA Class A, $2M general liability, full workers' comp.
Combined with hydrojetting
Inspect, jet the line clean, then re-inspect in a single mobilization with documented before-and-after records.
Pipe Camera Inspection FAQ
We inspect pipes ranging from 2 inches to 48 inches in diameter. Push cameras handle lines from 2 to 12 inches, while our robotic crawler units cover 6-inch through 48-inch pipes. For larger mains or trunk lines, we deploy tracked crawlers with pan-and-tilt heads that provide full 360-degree viewing of the pipe interior.
A single lateral line (50 to 100 feet) typically takes 30 to 45 minutes including setup. Longer runs or mainline inspections with a crawler can take one to two hours per segment. We provide same-day video reports with annotated footage, so you do not have to wait for results before making project decisions.
Yes. Our camera systems include built-in sonde transmitters that broadcast a locatable signal from the camera head. We use a topside locator to pinpoint the horizontal position and depth of any defect, blockage, or point of interest. This allows your excavation crew to dig directly to the problem without guesswork.
Every inspection includes a same-day video report. You receive the full recorded footage, timestamped screenshots of all findings, measured distances from the access point, and a written summary with our observations and recommendations. Reports are delivered digitally and formatted for easy inclusion in project submittals or RFI responses.
Absolutely. We frequently pair camera inspections with hydrojetting in a single mobilization. The typical workflow is to inspect first, identify blockages or buildup, jet the line clean, then re-inspect to confirm the line is clear. This saves you a return trip and gives you documented before-and-after condition records for the pipe.
Pipe camera inspections are quoted by pipe size, run length, number of lines, and site access, plus whether hydrojetting is included. A single lateral or building drain is the quickest scope, mainline sewer and storm drain runs take more time and equipment, and multi-line or full-site inspections are quoted as a package. Call (703) 880-8400 for a project-specific quote.
Our push cameras reach up to 200 feet, which covers most lateral lines and building drains. Robotic crawler units can travel 500 feet or more in mainline pipes, depending on pipe condition and diameter. For longer runs, we reposition at the next access point and continue the inspection in segments.
Yes. We inspect storm drain pipes, culverts, and stormwater management systems in addition to sanitary sewer lines. Storm drain inspections are common for pre-construction surveys, compliance documentation, and identifying sediment buildup or structural damage. We work with municipalities and general contractors across Fairfax County, Loudoun County, Washington DC, and Montgomery County, MD.
Push cameras are handheld units on flexible rods designed for smaller pipes from 2 to 12 inches in diameter and shorter runs up to 200 feet. Crawler cameras are motorized robotic units with pan-and-tilt heads that handle larger pipes from 6 to 48 inches and can travel 500 feet or more. Crawlers provide higher image quality and more maneuverability in mainline conditions.
You do not need to be on site. As long as we have access to the pipe entry points and any necessary permits or clearances, we can complete the inspection independently. We deliver the full video report digitally the same day, so you can review the findings on your own schedule.
Request a Pipe Inspection Quote
Tell us about your project and we will get back to you within 2 hours during business hours. Or call us directly:
(703) 880-8400Ready to Get Your Project Moving?
Call now or request a quote. We respond within 2 hours during business hours.