Water Heater Replacement
Commercial water heater replacement and installation for facilities, restaurants, and multi-tenant buildings. We remove and dispose of the old unit, install the new tank or tankless heater, and connect water, gas or electric, and venting across Northern Virginia, DC and Maryland.
What Is Commercial Water Heater Replacement?
Water heater replacement is the full swap of a failing, leaking, or undersized commercial water heater: we remove and dispose of the old unit, install the new tank or tankless unit as specified, and connect it to water, gas or electric, and venting.
It is built for facilities, restaurants, multi-tenant buildings, and property managers who need reliable hot water back in service without the risk of a sudden failure. We handle this work on commercial sites across Fairfax County, Arlington, Loudoun County, and the greater DC metro area.
The right next step is a quick assessment. Before we order or install, we look at the existing unit, your hot water demand, and the available gas or electric service and venting so the new heater is sized for the building rather than just matched to the old one. Undersized units are a common reason facilities and restaurants run short on hot water, so getting the sizing right up front is where a good replacement starts. We work on commercial properties throughout Prince William County, Washington, DC, Montgomery County, MD, and Prince George's County, MD.
OTM Construction Services handles the full scope so your building is not left waiting:
- Assessment and sizing for current demand
- Removal and disposal of the old unit
- Installation of the new tank or tankless heater
- Connection to water, gas or electric, and venting
- Testing and startup before we leave the site
Water heater work often surfaces alongside drain and sewer issues in the same mechanical room, so we can pair it with drain clearing, a sewer camera inspection, or hydrojetting on the same visit.
When Do You Need Water Heater Replacement?
If a unit is failing, leaking, or no longer keeping up with demand, replacement is the fix. Here are the most common situations where facilities, restaurants, and property managers across Northern Virginia, DC, and Maryland call us:
Leaking or Failing Units
A tank that is leaking, corroded, or at the end of its service life is a failure waiting to happen. We remove and dispose of the old unit and install a new one before a leak turns into water damage in Fairfax County and Arlington buildings.
Undersized Capacity
When tenants or staff run out of hot water, the unit is often undersized for current demand. We assess the load and install a right-sized tank or tankless heater so the building keeps up. Common on growing sites across Washington, DC and Loudoun County.
Restaurants and Food Service
Kitchens and dish lines depend on steady hot water. We replace failing units and size for the demand of a working kitchen so service is not interrupted, for restaurants across Prince William County and the DMV.
Multi-Tenant Buildings
Apartments, offices, and mixed-use buildings can't afford hot water outages across tenants. We replace aging or failing units and coordinate the swap to minimize disruption throughout Montgomery County and the region.
Aging Tank Replacement
Units past their service life are on borrowed time. Proactive replacement removes the risk of an unplanned failure and lets you schedule the work on your terms, for property managers in Prince George's County and Northern Virginia.
Tankless Upgrades
When a tank fails, it can be the right moment to convert to a tankless (on-demand) system that heats as needed and frees up floor space. Where the gas, electric, and venting support it, we handle the conversion across the DC metro area, and can clear the lines it feeds with hydrojetting.
How It Works
Four steps from assessment to hot water back in service.
Assessment and Sizing
We assess the existing unit, your hot water demand, and the available gas or electric service and venting. This confirms the right tank or tankless unit to specify so the replacement is sized for the building, not just matched to the old heater.
Removal and Disposal
We drain and disconnect the failing, leaking, or undersized unit, then remove and dispose of it. The mechanical room is cleared and ready for the new heater to be set in place.
Installation and Connection
We set the new tank or tankless unit and connect it to water, to its gas or electric supply, and to venting as the unit requires. Connections are made to fit the space and the specified unit.
Testing and Startup
We bring the new unit online, verify it is heating and holding, and check the connections before we leave. The building has reliable hot water back in service, with the old unit hauled away.
Units and Systems We Install
Tank or tankless, gas or electric, sized and connected for your building.
Commercial Tank Units
Storage tank water heaters that hold a set volume of hot water for steady demand. We replace like for like or upsize when the existing unit is undersized for the building's load.
Tankless (On-Demand)
Tankless systems that heat water as it is needed and free up floor space in the mechanical room. Where the gas, electric, and venting support it, we handle conversions from tank to tankless.
Gas, Electric and Venting
We connect the new unit to water, to its gas or electric supply, and to venting as the unit requires. Old unit removal and disposal is included so nothing is left behind.
Tank vs. Tankless Water Heaters
When you replace a unit, you can stay with a storage tank or move to a tankless system. Both are commercial-grade options, and the right choice depends on your demand, space, and existing gas, electric, and venting. Here is how they compare:
| Tank (Storage) | Tankless (On-Demand) | |
|---|---|---|
| How it works | Heats and stores a set volume of hot water | Heats water on demand as it flows |
| Footprint | Larger, needs floor space for the tank | Compact, wall-mounted, frees up floor space |
| Hot water supply | Limited by tank size, can run out under heavy draw | Continuous while sized correctly for demand |
| Upfront work | Straightforward like-for-like swap | May need gas, electric, or venting changes on conversion |
| Best for | Steady, predictable demand and simple replacement | Space savings and continuous demand where service supports it |
For commercial buildings in Fairfax County, Arlington, DC, and throughout the DMV, we help you weigh tank versus tankless against your hot water demand and the existing gas, electric, and venting, then install the unit that fits. If you are not sure which way to go, the assessment step is where we sort it out.
Water Heater Replacement Cost
Every replacement is quoted per unit and scope. Cost depends on the unit type and size, whether you stay with a tank or convert to tankless, the gas, electric, and venting work involved, and access to the mechanical room. Here is how the scope breaks down for commercial projects in Northern Virginia, DC, and Maryland:
Tank Like-for-Like
Quoted per unit
- Remove and dispose of the old tank unit
- Install a matching or upsized tank heater
- Reconnect water, gas or electric, and venting
- Test and bring the unit online
Right-Sized Upgrade
Quoted by scope
- Assessment and sizing for current demand
- Larger tank for facilities running short on hot water
- Common for restaurants and multi-tenant buildings
- Old unit removal and disposal included
Tankless Conversion
Quoted by scope
- Convert from tank to on-demand where supported
- Gas, electric, or venting adjustments as required
- Frees up floor space in the mechanical room
- Continuous hot water sized for the building
Pricing varies based on the unit specified, tank versus tankless, the gas, electric, and venting work, and site access. Water heater work often surfaces alongside drain and sewer issues, so bundle it with drain clearing, a sewer inspection, or hydrojetting on the same visit and save on mobilization. Call (703) 880-8400 for a project-specific quote covering Loudoun County, Prince William County, Montgomery County, MD, and surrounding areas.
One crew from the failed unit to hot water back online.
You are not juggling a removal crew, an install crew, and a hauler. One call, one mobilization, and one company standing behind the work.
Full-scope swap
Removal and disposal of the old unit, installation of the new tank or tankless heater, and connection to water, gas or electric, and venting, all in one crew.
Sized for your building
We assess hot water demand and available service before we install, so the new unit is right-sized instead of just matched to the old one.
Old unit hauled away
We drain, disconnect, and dispose of the failing unit as part of the job, so no decommissioned heater is left in the mechanical room.
Related work in one visit
Pair the replacement with drain clearing, a sewer inspection, or hydrojetting so the mechanical room is handled on a single mobilization.
Water Heater Replacement FAQ
Our commercial water heater replacement covers the full swap: removal and disposal of the old unit, installation of the new tank or tankless unit, and connection to water, gas or electric, and venting. We coordinate the work so the new unit is set, connected, tested, and ready to run before we leave the site.
Yes. We install both commercial tank and tankless (on-demand) water heaters as specified for your building. Tank units store and hold a set volume of hot water, while tankless units heat on demand and free up floor space. We can replace like for like or handle a conversion from tank to tankless where the gas, electric, and venting will support it.
Yes. Removal and disposal of the failing, leaking, or undersized unit is part of the scope. We drain, disconnect, and haul away the old heater so you are not left with a decommissioned unit taking up space in your mechanical room.
It is for facilities, restaurants, multi-tenant buildings, and property managers with water heaters that are failing, leaking, or undersized for current demand. If tenants or staff are running out of hot water, or a unit is at the end of its service life, replacement restores reliable hot water and removes the risk of a sudden failure.
Yes. Before we order or install, we assess your hot water demand, available gas or electric service, and venting so the new unit is sized for the building rather than just matched to the old one. Undersized units are a common reason facilities in Fairfax County, Loudoun County, and Prince William County run short on hot water, so right-sizing is part of what we plan up front.
We know a leaking or dead water heater is disruptive, especially in restaurants and multi-tenant buildings. We schedule replacements as quickly as crew availability and unit sourcing allow, with same-week and faster turnaround possible for urgent situations. Call (703) 880-8400 and we will tell you the fastest path to hot water back online.
Water heater problems often surface alongside drain and sewer issues in the same mechanical room. Facilities that replace a unit frequently pair it with drain clearing for slow or backed up lines, a sewer camera inspection to check line condition, or hydrojetting to clear scale and grease. Bundling these on one visit saves on repeat mobilizations.
Yes. Installation includes connecting the new unit to water, to its gas or electric supply, and to venting as the unit requires. We set the heater, make the connections, and test the unit so it is running before we complete the job across Northern Virginia, DC, and Maryland.
Request a Water Heater Replacement Quote
Tell us about your project and we will get back to you within 2 hours during business hours. Or call us directly:
(703) 880-8400Ready to Schedule Water Heater Replacement?
Call now or request a quote. We respond within 2 hours during business hours.