Call (703) 880-8400

Commercial Epoxy Flooring

High-performance epoxy floor coatings for warehouses, garages, manufacturing plants, and commercial spaces. We handle surface prep, application, and cure so your facility gets a floor that holds up to heavy traffic, chemicals, and daily abuse.

100% solids commercial systems Full surface prep included Chemical & abrasion resistant 10 to 20 year lifespan Licensed applicators
Call (703) 880-8400
Plan the whole job Concrete Repairthen Epoxy Flooringthen ESD Flooring

What Is Commercial Epoxy Flooring?

Epoxy flooring is a high-performance coating system made from a two-part resin and hardener that chemically bonds to a prepared concrete substrate. When properly installed, it creates a seamless, non-porous surface that resists abrasion, impact, chemicals, and staining.

The result is a floor that looks clean, performs under heavy use, and lasts for years with minimal maintenance. Commercial epoxy is not the same as the DIY kits sold at hardware stores. Professional-grade systems use 100% solids epoxy applied at 10 to 20 mils of thickness, compared to the 2 to 3 mil water-based products in consumer kits. The difference in durability, adhesion, and lifespan is significant.

Epoxy flooring is used across a wide range of commercial and industrial environments:

  • Warehouses and distribution centers, for forklift-rated durability and easy cleaning
  • Parking garages and vehicle bays, for chemical resistance against oil, fuel, and de-icing salts
  • Manufacturing plants, for a seamless surface that prevents dust and meets clean-room standards
  • Retail showrooms and lobbies, for decorative metallic and flake systems
  • Food service and commercial kitchens, for a USDA-compliant, non-porous finish that resists bacteria
  • Laboratories and healthcare, for chemical resistance and easy decontamination

OTM installs commercial epoxy flooring systems across Fairfax County, Loudoun County, Arlington, Prince William County, Washington DC, Montgomery County MD, and Prince George's County MD. We handle everything from surface assessment and moisture testing through grinding, coating, and final inspection. When your project also needs saw cutting for control joints or core drilling for floor drains, we coordinate everything in-house so you are not juggling multiple subs.

When Do You Need Epoxy Flooring?

Epoxy flooring is the right choice whenever your concrete floor needs to perform under demanding conditions. Here are the most common applications where general contractors and facility managers across Northern Virginia, DC, and Maryland call us:

Warehouse and Distribution Centers

Forklift-rated epoxy systems that withstand pallet jack traffic, heavy loads, and constant movement. Seamless surfaces make sweeping and scrubbing fast and effective. We coat warehouse floors across the Loudoun County data center corridor and Prince William County industrial parks.

Commercial Garages and Vehicle Bays

Chemical-resistant coatings that stand up to oil, brake fluid, antifreeze, and de-icing salts. Anti-slip additives and safety line markings included. Popular for fleet maintenance facilities and municipal vehicle bays in Fairfax County and Arlington.

Manufacturing Facilities

Seamless, dust-free flooring that meets clean-room and ESD (electrostatic discharge) requirements. Epoxy creates a surface that resists chemical spills, heavy machinery, and continuous foot traffic. Ideal for production floors, assembly areas, and packaging zones.

Retail Spaces and Showrooms

Decorative epoxy systems including metallic, flake, and quartz broadcast finishes that create a polished, professional appearance. High-gloss and satin finishes available. We install showroom floors for auto dealerships, furniture stores, and retail build-outs across Washington DC and the DMV.

Food Service and Commercial Kitchens

USDA-compliant, non-porous epoxy floors that resist bacteria, grease, and aggressive cleaning chemicals. Coved base systems seal the floor-to-wall transition for full washdown capability. Required for commercial kitchens, food processing, and brewery facilities throughout Montgomery County and the region.

Laboratories and Healthcare

Chemical-resistant epoxy systems rated for acids, solvents, and biological agents. Seamless, non-porous surfaces that meet infection control and decontamination standards. Installed in medical labs, veterinary clinics, pharmaceutical facilities, and research environments across Prince George's County and the greater DMV.

How It Works

Four steps from assessment to a finished floor.

1

Surface Assessment and Prep Plan

We inspect the concrete substrate for moisture, cracks, existing coatings, oil contamination, and surface condition. We perform moisture testing per ASTM standards and develop a preparation plan tailored to your slab and the epoxy system being installed. You get a clear scope and timeline before we start.

2

Grinding and Surface Preparation

We use diamond grinders or shot blasters to remove existing coatings, open the pores of the concrete, and achieve the correct CSP (Concrete Surface Profile) required by the coating manufacturer. Cracks are routed and filled. Joints are addressed. The surface is vacuumed clean before any coating is applied.

3

Epoxy Application

We apply the epoxy system in layers. A primer coat penetrates and seals the concrete. The body coat provides thickness, color, and chemical resistance. Broadcast media (vinyl flake, quartz, or metallic pigment) is applied into the wet coat if specified. A clear topcoat adds UV stability, gloss, and abrasion resistance.

4

Cure and Final Inspection

Light foot traffic is typically permitted within 18 to 24 hours. We perform a final inspection for adhesion, mil thickness, and finish quality. Full chemical and mechanical cure takes 5 to 7 days. We provide a cure schedule so you can plan equipment placement, move-in, and operations accordingly.

Our Epoxy Flooring Equipment

Professional-grade tools for surface prep and coating application.

Diamond Grinders

Planetary diamond grinding machines with variable-speed heads and dust collection systems. We use different diamond segments for different concrete hardness levels, ensuring the correct CSP profile every time. Our grinders handle everything from light coating removal to aggressive surface profiling on hard-troweled slabs.

Shot Blasters

Steel shot blasting equipment for large-area surface preparation. Shot blasters provide a uniform, consistent profile across warehouse and manufacturing floors quickly. They remove existing coatings, laitance, and surface contaminants in a single pass with integrated dust collection for a clean work environment.

Squeegee Applicators

Notched squeegees, gauge rakes, and roller frames designed for applying epoxy at the correct mil thickness. Proper application tools ensure uniform coverage, eliminate puddles and thin spots, and produce a consistent finish. We calibrate application tools for each system and each coat.

Spike Rollers

Spiked rollers used to release trapped air from freshly applied epoxy coatings. This step eliminates pin holes, fish eyes, and bubbles that can compromise the finish and long-term durability. Essential for self-leveling systems and metallic epoxy applications where a flawless surface is critical.

Epoxy vs. Polished Concrete vs. Tile

Choosing the right floor system depends on your facility's demands. Here is how epoxy stacks up against polished concrete and tile for commercial applications:

Epoxy Flooring Polished Concrete Commercial Tile
Durability Excellent. Resists impact, abrasion, and heavy traffic for 10 to 20 years. Good. Hard surface, but no chemical barrier or seamless membrane. Moderate. Individual tiles can crack under heavy point loads.
Chemical resistance High. Resists oils, solvents, acids, and cleaning chemicals. Low. Concrete is porous and stains without a topical sealer. Moderate. Tile surface resists chemicals, but grout lines absorb stains.
Installation time 2 to 5 days depending on system and square footage. 3 to 7 days for multi-step grinding and polishing process. 5 to 14 days for large areas including mortar set and grout cure.
Maintenance Low. Sweep and mop. No waxing, sealing, or re-grouting. Low to moderate. Periodic re-sealing recommended. High. Grout lines require regular cleaning, sealing, and eventual replacement.
Slip resistance Customizable. Anti-slip additives, quartz broadcast, and textured topcoats available. Low when wet unless treated with anti-slip additive. Varies by tile type. Can be slippery when wet unless textured tile is specified.
Cost Most cost-effective long-term for demanding, high-traffic use. Comparable installed cost where chemical exposure is minimal. Higher installed cost with substrate prep and grout.
Best for Warehouses, garages, manufacturing, kitchens, labs, retail. Retail, offices, lobbies, light industrial where chemical exposure is minimal. Restrooms, lobbies, light commercial spaces with low impact loads.

For commercial and industrial facilities across Northern Virginia, DC, and Maryland that need chemical resistance, heavy-traffic durability, and low maintenance, epoxy is the most cost-effective long-term solution. Polished concrete is a good option for spaces with minimal chemical exposure. Tile works for restrooms and light-use areas but is not practical for warehouses or production environments.

Epoxy Flooring Pricing

Epoxy flooring is quoted by the coating system, surface condition, square footage, and any custom requirements. Here is how the work breaks down by system for commercial projects in Northern Virginia, DC, and Maryland:

Standard Solid Epoxy

Warehouses and utility areas

  • Single solid color with clear topcoat
  • Diamond grinding surface prep included
  • Chemical and abrasion resistant
  • Ideal for warehouses, storage, and utility areas

Metallic / Custom

Showrooms and lobbies

  • Metallic pigments with three-dimensional depth effect
  • Custom color blends and patterns
  • High-gloss finish with UV-stable topcoat
  • Best for lobbies, showrooms, and high-end commercial

Pricing varies based on floor condition, moisture mitigation needs, crack repair, existing coating removal, and access constraints. Larger projects typically have a lower per-square-foot cost. We provide detailed written estimates after a site visit. Call (703) 880-8400 for a project-specific quote.

A coating is only as good as the bond underneath it.

Surface preparation is 90% of a successful epoxy floor, so we invest the equipment and time to get the slab right before a drop of resin goes down. One licensed crew handles prep, coating, and cure.

Proper surface prep

Diamond grinding, shot blasting, moisture testing, crack repair, and contaminant removal. We do not skip steps on prep.

Commercial-grade materials

100% solids systems from Dur-A-Flex, Sika, and Sherwin-Williams. No consumer-grade or water-based shortcuts.

Fast turnaround

Most standard installs finish in 2 to 4 days including prep, coating, and initial cure, phased around your active operations.

Licensed and insured

VA Class A license, $2M general liability, and full workers' compensation, documented and current for your project files.

10-20 yrs
Typical floor life
100% solids
Commercial-grade epoxy
2-4 days
Standard install
Class A
VA licensed & insured

Epoxy Flooring FAQ

A professionally installed commercial epoxy floor typically lasts 10 to 20 years depending on traffic volume, chemical exposure, and maintenance practices. High-traffic warehouse floors with forklift use may show wear sooner, while properly maintained garage or showroom floors can exceed 20 years. Topcoats and recoats can extend the life further without a full reinstall.

It depends on the condition of the existing coating. If the old coating is well-bonded and in decent shape, we can abrade the surface and apply a new epoxy system over it. If the existing coating is peeling, flaking, or contaminated with oil, we remove it completely through diamond grinding or shot blasting before applying the new system. We always test adhesion before proceeding.

Most commercial epoxy systems allow light foot traffic within 18 to 24 hours after the final coat. Full chemical and mechanical cure typically takes 5 to 7 days depending on temperature and humidity conditions. We provide a specific cure schedule for your project so you can plan move-in, equipment placement, and resumption of operations accordingly.

Epoxy flooring is quoted by the coating system, floor condition, surface prep requirements, and total square footage. A standard solid-color epoxy is the most economical option, flake and quartz broadcast systems cost more for the added texture and layers, and metallic or custom designer systems are the premium tier. Larger projects carry a lower per-square-foot cost, and moisture mitigation or existing coating removal add to prep. Call (703) 880-8400 for a quote tailored to your project.

Yes. Moisture testing is a critical step before any epoxy installation. Excess moisture vapor transmission through the concrete slab is the number one cause of epoxy coating failure, including delamination, bubbling, and adhesion loss. We perform calcium chloride tests or relative humidity testing per ASTM F1869 and ASTM F2170 standards to confirm the slab is within acceptable limits. If moisture levels are too high, we recommend a moisture mitigation system before coating.

Yes. We repair cracks and spalls as part of our surface preparation process. Hairline cracks are filled with epoxy filler that bonds flush with the surrounding surface. Larger structural cracks may require routing and filling with a flexible polyurea joint filler that accommodates movement. We also address expansion joints, control joints, and surface imperfections so the finished floor is smooth, sealed, and structurally sound.

Modern commercial epoxy systems are formulated with low VOC content and meet indoor air quality standards for occupied buildings. We use 100% solids epoxy systems whenever possible, which have virtually zero VOCs once cured. During application, we maintain proper ventilation per manufacturer guidelines to manage any odor. After full cure, epoxy floors are inert, non-porous, and do not off-gas. Many of the systems we use are LEED-compliant and approved for use in schools, hospitals, and food service environments.

Most commercial epoxy systems require a concrete surface temperature between 50 and 90 degrees Fahrenheit during application and cure. The surface temperature must also be at least 5 degrees above the dew point to prevent condensation that interferes with adhesion. We monitor both air and slab temperatures throughout the installation with infrared thermometers and hygrometers. In winter, temporary heating may be needed. In summer, we schedule work to avoid peak heat that accelerates cure times beyond workable limits.

Yes. We install metallic epoxy systems that create a high-gloss, three-dimensional look with swirling color patterns and depth. Metallic epoxy is popular for showrooms, lobbies, retail spaces, and high-end commercial environments across Washington DC, Arlington, and the DMV. Each floor is unique because the metallic pigments shift and flow during application. We work with you on color selection and can create custom blends to match your design vision.

We typically schedule epoxy flooring projects within 1 to 2 weeks of the initial site assessment, depending on material lead times and project scope. For urgent projects across Fairfax County, Loudoun County, and the greater Northern Virginia area, we can often fast-track scheduling. Call (703) 880-8400 to discuss your timeline and we will work to fit your schedule.

Request an Epoxy Flooring Quote

Tell us about your project and we will get back to you within 2 hours during business hours. Or call us directly:

(703) 880-8400
VA Class A Licensed
$2M General Liability
Same-Week Availability

Ready to Get Your Project Moving?

Call now or request a quote. We respond within 2 hours during business hours.

Call (703) 880-8400