Call (703) 880-8400

Concrete Polishing & Grinding

We grind bare or worn concrete and polish it through progressive grits into a hard, dust-resistant, light-reflective floor. Grinding, densifier, polishing to your sheen and a stain guard are all included. A durable, low-maintenance floor for warehouses, showrooms, retail and offices across Northern Virginia, DC and Maryland, with no separate coating required.

Grinding to stain guard Matte to high-gloss No separate coating Nearly dust-free grinding Same-week availability
Call (703) 880-8400
Plan the whole job Concrete Repairthen Concrete Polishingor Epoxy Flooringor ESD Flooring

What Is Concrete Polishing?

Concrete polishing mechanically grinds a bare or damaged slab and polishes it through progressively finer diamond grits into a hard, dust-resistant, light-reflective finished floor. Instead of covering the concrete, it turns the existing slab into the finished floor.

Our scope includes surface grinding and flattening, crack and joint prep, densifier application, polishing to the sheen you specify from matte to high-gloss, and a stain guard sealer. We polish floors on commercial sites across Fairfax County, Arlington, Loudoun County, and the greater DC metro area. It is built for:

  • Warehouses and distribution centers
  • Retail spaces and showrooms
  • Offices and commercial interiors
  • New slabs, polished once cured
  • Existing floors, resurfaced and refinished
  • Any commercial space wanting a durable, low-maintenance floor

Densifying hardens the top of the slab and the polishing sequence closes and refines the surface, so there is nothing to chip, peel, or reapply the way a coating can. That durability, plus simple dust-mop maintenance, is why general contractors and facility owners choose polished concrete for high-traffic commercial floors throughout Prince William County, Washington, DC, Montgomery County, MD, and Prince George's County, MD.

OTM Construction Services handles the full process with professional-grade planetary grinders and diamond tooling. If the slab is cracked or spalled, it should be fixed first, and we handle that with our concrete repair service before polishing begins. If your space calls for a color, a seamless film, or static control instead of a polished finish, epoxy flooring or ESD flooring is the better fit, and we install both. We manage the job from assessment through the final guard coat so your floor is ready to use.

Where Polished Concrete Fits

If you want a durable, low-maintenance floor that uses the slab you already have, concrete polishing is the right method. Here are the most common commercial spaces where general contractors and facility owners across Northern Virginia, DC, and Maryland call us:

Warehouses & Distribution

A hardened, dust-resistant floor that stands up to forklift and pallet-jack traffic without a coating to wear through. The light-reflective finish also brightens the space and can cut lighting load. Common on industrial floors in Loudoun County and Prince William County.

Retail & Showrooms

A clean, high-gloss floor that reads as a finished design surface, not a shop floor. Polished concrete gives retail and showroom spaces a low-maintenance floor that holds up to heavy foot traffic in Fairfax County and Arlington.

Offices & Commercial Interiors

A modern satin or semi-gloss floor for office build-outs, lobbies, and common areas. Simple dust-mop upkeep and no coating to reapply keep long-term maintenance low on projects across Washington, DC and the DMV.

Existing Floor Resurfacing

We grind off old coatings, tile, mastic, and adhesive to expose sound concrete, then polish it into a finished floor. Ideal for renovations that need to shed a failing surface throughout Montgomery County and the region.

New Slab Finishing

Once a new slab is cured, we polish it into the final floor so there is no need for a separate coating trade. A cost-effective finish for new commercial construction in Prince George's County and Northern Virginia.

Repair Then Polish

Cracked, spalled, or patched slabs need to be sound before polishing. We coordinate concrete repair first, then grind and polish so the finished floor is consistent edge to edge across the DC metro area.

How It Works

Four steps from a bare or worn slab to a finished, guarded floor.

1

Assess and Grind

We evaluate the slab, prep and fill cracks and joints, then grind with metal-bond diamonds to flatten the floor and strip any old coating or adhesive. If the slab needs structural repair, that is handled first. This opens and levels the concrete for a consistent finish.

2

Densify

We apply a chemical densifier that reacts with the concrete to harden the surface. A hardened slab polishes tighter, resists dust and wear, and holds its sheen far longer than an untreated floor.

3

Polish Through the Grits

We polish the floor with progressively finer resin-bond diamonds, moving from coarse to fine grits until we reach the sheen you specified, anywhere from a matte satin to a high-gloss mirror finish.

4

Guard and Finish

We apply a stain guard sealer and give the floor a final buff. The area is left clean and the finished floor is ready for traffic, with no separate coating required.

Our Polishing Equipment

Professional-grade grinders and tooling for any slab size and sheen level.

Planetary Grinders

Counter-rotating planetary grinders rated for continuous duty. Multiple head sizes cover large open warehouse floors as well as tighter offices, corridors, and edge work.

Metal and Resin Diamond Tooling

A full sequence of metal-bond diamonds for grinding and flattening, then resin-bond diamonds in progressive grits for polishing. The grit range lets us hit any sheen from matte satin to high-gloss.

Densifiers, Guards & HEPA Extraction

Chemical densifiers and stain guard sealers to harden and protect the surface, paired with HEPA dust extraction so grinding is nearly dust-free. That lets us polish in occupied and finished commercial spaces.

Polished Concrete vs. a Coated Floor

Polishing is not the only way to finish a commercial slab. The main alternative is a coating such as epoxy or ESD flooring. Here is how a polished floor compares to a coated one so you can pick the right finish for your space:

Polished Concrete Epoxy Coating Bare / Sealed Concrete
What it is The existing slab ground and polished into the finished floor A film coating applied over the slab Untreated or lightly sealed slab
Durability High, hardened surface with nothing to peel High, but the film can chip and wear Low, dusts and stains over time
Maintenance Dust mop and occasional wet clean Periodic recoat as the film wears Ongoing dusting and resealing
Color options Natural concrete tones and sheen levels Full color and custom finishes Natural concrete only
Static control Not designed for ESD control Available with an ESD coating system None
Reapplication None, the floor is the slab Recoat required over the life of the floor Reseal periodically
Best for Warehouses, retail, showrooms, offices wanting a durable low-maintenance floor Spaces needing color, a seamless film, chemical resistance, or static control Back-of-house areas where appearance is not a factor

For commercial projects in Fairfax County, Arlington, DC, and throughout the DMV, polished concrete is the go-to when you want a durable, low-maintenance floor without adding a coating. When the space needs a specific color, a seamless film, or static dissipation, epoxy flooring or ESD flooring is the better call, and we install those too. Either way, a cracked or spalled slab should get concrete repair before it is finished.

What Concrete Polishing Costs

Polishing is priced per square foot, and the rate depends on the finish you want and the shape the slab is in. Rather than quote a flat number, we scope each floor. These are the factors that set your price:

Sheen Level

Matte to high-gloss

  • Satin and semi-gloss for warehouses and offices
  • High-gloss for retail and showrooms
  • Higher sheen means more grit passes
  • Set to the finish you specify

Size & Access

Quoted per square foot

  • Total square footage of the floor
  • Open floors vs. tight rooms and edge work
  • Number of grinding and polishing passes
  • Densifier and stain guard included

Your final rate depends on the sheen level, the condition of the slab, how much crack or coating removal is needed, and the square footage and access. If the floor needs structural work, we handle concrete repair before polishing. If you decide a coating fits better than a polished finish, we can quote epoxy flooring or ESD flooring instead. Call (703) 880-8400 for a project-specific quote covering Loudoun County, Prince William County, Montgomery County, MD, and surrounding areas.

One crew grinds, polishes, and guards the whole floor.

You are not coordinating a grinding sub, a densifier crew, and a sealer. One call, one crew, and one company that finishes the floor and stands behind it.

Full scope in one crew

Grinding, crack and joint prep, densifier, polishing to your sheen, and the stain guard are all handled by one crew. No coordinating separate trades to finish the floor.

Finish to your sheen

We polish to the exact sheen you specify, from a low-glare matte to a high-gloss mirror finish. The floor you sign off on is the floor we deliver.

Nearly dust-free

HEPA dust extraction on our grinders keeps the process clean, so we can polish in occupied and finished commercial spaces without shutting the area down.

Repair or coat if needed

We fix a cracked or spalled slab with concrete repair before polishing, and if a coating suits your space better we install epoxy and ESD flooring too. One call covers the whole floor decision.

Any sheen
Matte to high-gloss
HEPA
Nearly dust-free
2 hr
Quote turnaround
Class A
VA licensed & insured

Concrete Polishing FAQ

Polished concrete is a finished floor made by mechanically grinding a bare or damaged slab and then polishing it through progressively finer diamond grits. A chemical densifier hardens the surface and a stain guard seals it. The result is a hard, dust-resistant, light-reflective floor that needs no separate coating.

Every job includes surface grinding and flattening, crack and joint prep, densifier application, polishing to the sheen you specify from matte to high-gloss, and a stain guard sealer. We handle the full process from grinding through the final buffed finish so the floor is ready to use.

We polish to your specified sheen, from a low-gloss matte finish to a high-gloss mirror finish. The sheen is set by how far we take the floor through the diamond grit sequence. Warehouses often choose a satin or semi-gloss level for durability and light reflection, while showrooms and retail spaces often want high-gloss.

Minor cracks and joints are prepped and filled as part of the polishing process. If the slab is heavily cracked, spalled, or has failed sections, it should be repaired first. We handle that with our concrete repair service before polishing so the finished floor is sound and consistent.

Polishing is priced per square foot. The main cost drivers are the sheen level, the condition of the slab, how many grinding and grit passes are required, and how much crack or joint repair is needed up front. We provide a project-specific quote after reviewing the square footage and slab condition. Call (703) 880-8400 to get scoped.

It depends on the space. Polished concrete uses the existing slab as the finished floor, so there is no coating to chip, peel, or reapply. If you need a specific color, a seamless film, or static control, an epoxy or ESD flooring system is the better choice. We install both, so we can walk you through the trade-offs for your space.

Very. Densifying hardens the top of the slab and polishing closes the surface, so the floor stands up to forklift traffic, foot traffic, and rolling loads without a coating to wear through. Routine maintenance is dust mopping and occasional wet cleaning, which is why warehouses and distribution centers favor it.

Both. We polish new slabs once they are cured and we resurface existing floors, including slabs under old coatings, tile, or adhesive. Existing floors are ground to remove the old surface and expose sound concrete before we begin the polishing sequence. We work on commercial floors across Fairfax County, Washington, DC, and the DMV.

Yes. Our grinders run with HEPA dust extraction so the process is nearly dust-free, which lets us work in occupied and finished commercial spaces. Wet polishing steps contain slurry, and we leave the area clean at the end of each phase.

Request a Concrete Polishing Quote

Tell us about your floor, the square footage, and the sheen you want, and we will get back to you within 2 hours during business hours. Or call us directly:

(703) 880-8400
VA Class A Licensed
$2M General Liability
Same-Week Availability

Ready to Polish Your Floor?

Call now or request a quote. We respond within 2 hours during business hours.

Call (703) 880-8400