Call (703) 880-8400

Architecture & Design-Build

In-house design paired with in-house crews. We draw the project and we build it: MEP, framing, concrete, finishes, and sprinkler. One contract, one team, one company answering for the result.

In-house design and crews Self-perform MEP, framing, concrete, sprinkler One contract, one team Cost priced at concept Commercial interiors, DMV focused
Call (703) 880-8400
Plan the whole job Architecturethen Demolitionthen Sprinkler & Fire Alarm Testing

Design and Construction Under One Roof

On a conventional commercial project, the design and the build live in two different companies with two different contracts. The design firm draws it. The owner bids it. A general contractor wins the job and starts finding out what the drawings did not account for. Every discovery becomes an RFI, then a change order, then an argument about whose problem it is. The owner sits in the middle paying for both sides of that argument.

Design-build collapses that structure. OTM carries the design and the construction under one agreement, and we self-perform the work: MEP, framing, concrete, finishes, and sprinkler. The people drawing the reflected ceiling plan and the people hanging the ductwork under it work for the same company. When a duct run and a beam want the same six inches, that gets settled on the screen during design, not at 6 a.m. in a ceiling with two foremen and a schedule on fire.

That single point of accountability is the entire point. There is no designer-versus-builder finger pointing available to us, because we are both. If the design misses something, we own it. If the field hits something, we own that too. The owner gets one number to call and one company that cannot pass the problem sideways.

We provide design and design-build services for commercial tenants, building owners, property managers, and developers across Arlington, Fairfax County, Loudoun County, Washington DC, and the greater DMV. The work concentrates where the commercial interior market does: the Rosslyn-Ballston corridor, Tysons Corner, the Dulles logistics corridor, and DC institutional and agency space.

What We Design

The design side of OTM exists to serve commercial construction, not to win awards. Every deliverable below is scoped around a real decision someone has to make: whether to sign the lease, what the buildout will cost, how the space gets configured, or what the crews build from. Here is the work we take on across Northern Virginia, DC, and Maryland:

Design-Build Commercial Projects

The lead offering. We design the project and build it with our own crews, under one contract and one schedule. MEP, framing, concrete, finishes, and sprinkler are all self-performed, so design decisions get pressure-tested against actual crew capacity and real lead times before the set is issued. Available across Fairfax County, Arlington, and the DC metro.

Tenant Fit-Out Design

Turning a shell or a tired suite into space a tenant can occupy. We handle the layout, partition and ceiling strategy, MEP distribution, finish selections, and the coordination between them. Fit-outs live or die on the ceiling: what has to fit above it, how high it can go, and whether the existing distribution can serve the new plan. That gets resolved first, not last.

Test Fits for Lease Evaluation

Before a tenant signs, they need to know the space actually holds the program. We produce test fits showing headcount, private offices, conference rooms, open seating, and support spaces mapped onto the real suite. Brokers and landlords along the Arlington Rosslyn-Ballston corridor and Tysons use test fits to move deals off the fence.

As-Built Documentation

Older buildings rarely match their drawings, and plenty of suites have no current drawings at all. We field-verify existing conditions with laser measurement and produce accurate base plans: column grid, core walls, window mullion spacing, ceiling heights, and existing MEP infrastructure. Common work in DC and inner Fairfax where original drawings are decades stale.

Permit-Set Drawings & Submission

We develop the permit set and run it through the jurisdiction ourselves: initial submission, plan review comments, resubmittal, and permit issuance. Every county does this differently. Fairfax County, Loudoun County, Arlington, DC, and Montgomery County each have their own submission requirements and review cycles, and we build the set to match the reviewer who will actually open it.

Stamped Construction Documents

When the jurisdiction requires an architect's seal, our licensed architect stamps and seals the set before it goes in. Sheets requiring an engineer's seal are coordinated with the licensed engineer for that discipline. The result is a permit-ready package that carries the signatures the building department is looking for on the cover sheet.

How Design-Build Works

Four steps from program to a project our own crews build.

1

Program, Site Review & As-Built Verification

We start by documenting what you actually need: headcount, private office and conference room counts, open seating, break and support areas, server rooms, specialty spaces, and the schedule driving all of it. Then we walk the space and field-verify existing conditions with laser measurement. Column grid, core walls, window lines, ceiling heights, structural depths, and existing MEP infrastructure get recorded so the design starts from the building that exists rather than the building an old drawing describes.

2

Test Fit & Concept Design

We produce test fit options showing how the program lands in the space, with square footage allocations and notes on any compromises each option forces. Each option carries a rough order of magnitude construction cost, because a layout you cannot afford is not a layout. Having the design conversation and the budget conversation in the same meeting is the difference between choosing a direction and discovering three months later that you chose wrong.

3

Design Development With the Build Team

Once a direction is approved, we develop it into a coordinated design, and our trade leads review it while it is still a drawing. The MEP lead checks distribution and routing against the ceiling. The framing lead checks partition types, header conditions, and stacking. The sprinkler lead checks head layout against the reflected ceiling plan. The concrete lead flags anything that needs coring or cutting. Conflicts get resolved at the desk, where a fix costs an hour instead of a week.

4

Construction Documents & Self-Performed Buildout

We issue the construction document set and build the work with our own crews. Field questions get answered by the people who drew the sheet, usually the same day, without an RFI cycle bouncing between two companies. Because the design intent and the means and methods live under one roof, what gets built is what got drawn, and there is no seam for the schedule to fall through.

Design-Build vs. Design-Bid-Build vs. Contractor-Only

There are three common ways to get a commercial interior project delivered, and they differ in who carries the risk when the drawings and the field disagree. Understanding the tradeoffs helps you pick the structure that fits your project:

Design-Build (OTM) Design-Bid-Build Contractor-Only
Contracts One contract covering design and construction Two contracts: design firm, then general contractor One construction contract, owner supplies the drawings
Who Owns a Drawing Error OTM. We drew it and we built it, so it is ours either way Disputed. Designer says field error, builder says design error The owner, through their design team
When Cost Enters the Conversation At concept, with real numbers from the crews who do the work At bid, after the design is already committed At bid, on a design already complete
Coordination Risk Resolved in design by the trade leads who will build it Surfaces in the field as RFIs and change orders Surfaces in the field, resolved through the design team
Schedule Design and buyout overlap, construction starts sooner Sequential. Design, then bid period, then construction Depends on when the owner's design set is finished
Best For Owners who want one accountable party and a faster start Projects requiring competitive bids on a fixed design Owners with a design team already engaged

OTM works in all three structures. If you already have an architect, we are happy to be the contractor and bring our preconstruction review to their set. If you have a design-bid-build process you are required to follow, we bid it. Design-build is what we recommend when the owner's priority is a single accountable party and a schedule that does not wait on a bid period, and it is where our self-perform crews create the most value.

Architecture Pricing

Design fees depend on square footage, program complexity, the condition of the existing space, and how far the documentation has to go. A shell fit-out with a straightforward open plan and a lab conversion in a 1970s building are not the same exercise. Here is how we structure the work:

Test Fit & Concept

Custom Quote

  • Program intake and site walk
  • One or more test fit options for the suite or shell
  • Square footage allocations and program fit notes
  • Rough order of magnitude construction cost per option
  • PDF and DWG deliverables

Documentation Only

Custom Quote

  • As-built base plans from field verification
  • Full fit-out design and construction documents
  • Coordination with your existing engineering consultants
  • Permit-set drawings built to the jurisdiction's requirements
  • Permit submission and plan review comment responses
  • Sealed sheets where the jurisdiction requires them
  • Deliverables in PDF, DWG, or RVT

Design fees scale with square footage and complexity. Medical, dental, and laboratory spaces sit at the higher end because of the code and coordination load they carry. When you take the design-build package, the design fee is credited into the construction contract, which is the honest version of bundling: you are not paying twice for the same coordination. Call (703) 880-8400 and describe the space, and we will scope it.

One company draws it, builds it, and answers for it.

You are not refereeing a designer and a builder trading blame across a seam. OTM carries the design and the construction, self-performs the trades, and stands behind the result with one number to call.

One point of accountability

We drew it and we built it, so a drawing error and a field error are both ours. No scope to pass sideways, one company to call.

We self-perform what we draw

MEP, framing, concrete, finishes, and sprinkler are in-house, so the design accounts for how the work actually gets built before the set is issued.

Cost enters at concept

We price options as we draw them, using numbers from the crews who do the work, so you learn what a direction costs while changing it is still free.

Commercial only, DMV focused

Offices, medical and dental, retail, restaurants, and flex space across Washington DC, Northern Virginia, and Montgomery County, MD. No residential.

1
Contract for design and build
5
Self-performed trades
2 hr
Quote turnaround
Class A
VA licensed & insured

Architecture FAQ

Design-build means one company holds the design contract and the construction contract. The design is developed with the builder in the room, then the same company builds it. Design-bid-build separates the two: a design firm produces drawings, the owner bids those drawings to general contractors, and the low bidder builds what was drawn. Design-build removes the gap between the two, which is where most change orders and schedule slips are born. It also compresses the schedule, because buyout can start while the design is still finishing.

Yes. OTM self-performs MEP, framing, concrete, finishes, and sprinkler work with in-house crews. On a design-build project, the people drawing the ceiling plan and the people hanging the ductwork report to the same company. That means the design gets checked against real crew capacity, real material lead times, and real field conditions before it leaves the office. Specialty scopes outside our self-perform trades are subcontracted and managed by us.

A test fit is a preliminary floor plan showing how a tenant's program, meaning headcount, private offices, conference rooms, open seating, and support spaces, fits inside a specific suite or shell. Tenants use test fits during lease evaluation to confirm a space works before signing. Landlords and brokers use them to show a prospect what the space can become. If you are comparing two or three suites in Arlington or Tysons, a test fit on each one is how you compare them on something other than the rent number. See our space planning and test fit service for the standalone version of this work.

Yes. We field-verify existing conditions with laser measurement tools and produce accurate as-built base plans. That includes column grids, core walls, window lines, ceiling heights, and existing MEP infrastructure. This is common in older buildings across Arlington, Fairfax County, and Washington DC where original drawings are missing, outdated, or never reflected what was actually built. On buildings where the slab or the structure is in question, we pair as-built work with GPR scanning so what is inside the concrete gets documented too.

As early as the space is a real candidate. The most expensive decisions on a fit-out get made before a single wall is framed: suite selection, demising strategy, whether the existing HVAC distribution can serve the new layout, and whether the ceiling has the height for the ductwork the plan implies. Bringing the design and construction team in during lease evaluation is when our input is cheapest to act on. Once the lease is signed and the schedule is set, the options narrow fast.

Yes. Plenty of projects arrive with a design team already engaged, and we build those jobs as a contractor. We can also come in on the preconstruction side to review a design set for constructability, flag coordination conflicts before they reach the field, and price the work as drawn. Design-build is an option we offer, not a condition of working with us. If your architect wants a partner who will tell them about the beam conflict during design instead of during framing, that is a role we are glad to play.

Yes. We produce permit-set drawings and handle the submission through the jurisdiction's process, including Fairfax County, Loudoun County, Arlington, Prince William County, Washington DC, Montgomery County, and Prince George's County. That covers the initial submission, responses to plan review comments, and resubmittal until the permit is issued.

Yes. Construction documents that require an architect's seal are stamped and sealed by our licensed architect before submission. Structural, mechanical, electrical, and plumbing sheets that require an engineer's seal are coordinated with the appropriate licensed engineer for that discipline. Not every project needs a sealed set, and we will tell you up front which category yours falls into rather than selling you documentation the jurisdiction is not asking for.

We submit permit sets and pull building permits throughout Northern Virginia, Washington DC, and suburban Maryland. Each jurisdiction runs its own plan review process with its own submission requirements, review timelines, and comment cycles. We track those differences by jurisdiction so the set that goes over the counter is the set that jurisdiction expects, which is most of what separates a clean review from a third round of comments.

We work throughout Northern Virginia, Washington DC, and suburban Maryland. That includes Fairfax County, Loudoun County, Arlington, Prince William County, Washington DC, Montgomery County, and Prince George's County. The Tysons Corner and Rosslyn-Ballston office corridors and the Dulles logistics corridor are where most of our commercial interior work concentrates.

Request an Architecture Quote

Tell us about your project and we will get back to you within 2 hours during business hours. Or call us directly:

(703) 880-8400
VA Class A Licensed
$2M General Liability
Design and Build Under One Contract

Ready to Get Your Project Moving?

Call now or request a quote. We respond within 2 hours during business hours.

Call (703) 880-8400